LS Industrial Systems iS7 User Manual

iS7 Ethernet Option Manual
35
Drive Fault Reset
At 0  1 (FALSE  TRUE), the Drive Fault Reset gives TRIP RESET
reference to Inverter. Overwriting 1 (TRUE) on 1 (TRUE) does not
generate RESET reference to the Inverter trip. To send RESET
reference from Option to Inverter in 1 (TRUE) status, write 0 (FAULT)
and then write 1(TRUE) again.
 Service
Service
Code
Definition
Support
for Class
Support
for Instance
0x0E Get Attribute Single No Yes
0x10 Set Attribute Single No Yes
④
④④
④ AC Drive Object (Class 0x2A, Instance 1)
 Attribute
Attribute
ID
Access
Attribute
Name
Range
Definition
3 Get At Reference
0
Means that the output
frequency has not
reached the set up
frequency, yet.
1
Means that the output
frequency has reached
the set up frequency.
4
Not
suppor-
ted
Net Reference - -
6 Get
Drive Mode
(Note1)
0 Vendor Specific Mode
1
Open Loop
Speed(Frequency)
2
Closed Loop Speed
Control
3 Torque Control
4 Process Control (e.g. PI)
7 Get SpeedActual 0~ Displays present output

LS Industrial Systems iS7 Specifications

General

Brand	LS Industrial Systems
Model	iS7
Category	Inverter
Language	English