LSIS GIPAM 115 FI - MMI Layout and Components; Menu Key Functionality; LED Indicator Status Guide

7
1.2
1.2 1.2
1.2 C
CC
Configuration
onfigurationonfiguration
onfiguration
A) The basic function & operation of keys on GIPAM-115FI
The key on the surface of GIPAM-115FI has its own function according to each menu.
T
TT
The type of key
he type of keyhe type of key
he type of key Applicable menu
Applicable menuApplicable menu
Applicable menu Basic function
Basic functionBasic function
Basic function
Menu tree Move between items Direction key
(Up, Down)/
(DEC, INC)
Correcting & setting menu Move to the data which will be set
Correcting & setting menu The saving of changed data or removing of saved data
ENT key
Menu tree Move to the menu where cursor is on
Correcting & setting menu The cancel of changed data
ESC key
Menu tree Move to upper menu
SET/RUN key Relay setting menu Selecting the relay which will be used or Moving to relay setting menu
CLOSE key
OPEN key
Menu tree
The control of CB
Close Key is for the close of CB
Open Key is for the open of CB
LOCAL key
REMOTE key
Menu tree The switching of Remote and Local
CLEAR key Menu tree
Reset the accumulated values
Ex) Wh, Varh, CB ON time, CB operation count, Vo max.
B) The basic function & operation of LED on GIPAM-115FI
The type of LED
The type of LEDThe type of LED
The type of LED Basic function
Basic functionBasic function
Basic function
POWER LED
It is with red and indicates the status of power supply
For normal operation it is kept with red light ON
COMM LED
It is with red and indicates the status of remote communication. The LED is blinking while transmitting or
receiving data under normal correspondence of communication card.
PICK-UP/TRIP LED
(OCR,OCGR,OVR,UVR,
OVGR,SGR,POR)
It is with red and indicates the protection relay. It is blinking every second if protection relay is in the
condition of Pick-up by systematic faults. It is kept with red light ON if it is tripped by the operation of
protection relay. This LED can be cancelled only by RESET KEY of protection relay or reset of it with remote
communication.
REMOTE/LOCAL It is on the upper side of R/L KEY with yellow and indicates the present control status
CB CLOSE/OPEN
It is on the upper side of CLOSE/OPEN KEY with green & red and indicates the present status of circuit
breaker which is connected to GIPAM-115FI. Red LED is ON when CB is closed and Green LED is ON
when CB is opened.
1.
1. 1.
1. The Layout of MMI
The Layout of MMIThe Layout of MMI
The Layout of MMI