LSIS XGK-CPUU - Page 23

Chapter 2 System Configuration
2 -3
Product Model Description Remarks
XGP-ACF1 AC100V~240V input
• DC5V: 3A, • DC24V: 0.6A
XGP-ACF2 AC100V~240V input
• DC5V: 6A
XGP-AC23 AC100V~240V input
• DC5V: 8.5A
Power module
XGP-DC42 DC24V Input
• DC5V: 6A
XGC-E041
• Length : 0.4 m
XGC-E061
• Length : 0.6 m
XGC-E121
• Length : 1.2 m
XGC-E301
• Length : 3.0 m
XGC-E501
• Length : 5.0 m
XGC-E102
• Length : 10 m
Extended cable
XGC-E152
• Length : 15 m
Total
extension
distance
should not
exceed
15m
Terminator XGT-TERA
• Must use for base expansion
-
Dust-proof
Module
XGT-DMMA
• Dust protection module for not-used slot
-
Battery XGT-BAT
• Battery for XGT (DC 3.0V / 1,800 mAh)
XGF-AV8A
• Voltage Input: 8 channel
• DC 1 ~ 5V / 0 ~ 5V / 0 ~ 10V / −10 ~ +10V
XGF-AC8A
• Current Input: 8 channel
• DC 4 ~ 20mA / 0 ~ 20mA
XGF-
AD08A
Voltage/Current Input: 8 channels
XGF-AD4S
• Voltage/Current Input: 4 channels
• Insulation between channels
XGF-
AD16A
• Voltage/Current Input: 16 channels
Analog input
Module
XGF-AW4S
• 2-wire voltage/current input: 4 –channel, insulation between
channels
• 2-wire transmitter driver power supported
XGF-DV4A
• Voltage Output: 4 channels
• DC 1 ~ 5V / 0 ~ 5V / 0 ~ 10V / −10 ~ +10V
XGF-DC4A
• Current Output:: 4 channels
• DC 4 ~ 20mA / 0 ~ 20mA
XGF-DV4S
• Current Output:: 4 channels
• Insulation between channels
XGF-DC4S
• Current Output:: 4 channels
• Insulation between channels
XGF-DV8A
• Voltage Output: 8 channels
• DC 1 ~ 5V / 0 ~ 5V / 0 ~ 10V / −10 ~ +10V
Analog output
Module
XGF-DC8A
• Current Output:: 8 channels
• DC 4 ~ 20mA / 0 ~ 20mA
Analog I/O
Module
XGF-AH6A
• Voltage/Current input 4 channels
• Voltage/Current output 2 channels
Thermocouple
Input Module
XGF-TC4S
• Temperature (T/C) Input, 4 channels,
• Insulation between channels
XGF-RD4A
• Temperature (RTD) Input, 4 channels
RTD Input
Module
XGF-RD4S
• Temperature (RTD) Input, 4 channels
• Insulation between channels