Chapter 4 CPU Module
4- 2
Specification
Items
XGK-CPUE XGK-CPUS XGK-CPUA XGK-CPUH XGK-CPUU
Remarks
Total number of
program
256
Initialization task 1
Cyclic task 32
Program
configu-
ration
Internal device
task
32
Operation mode RUN, STOP, DEBUG
Self-diagnosis
Operation delay monitoring, memory error, input/output error, battery
error, power error etc.
Program port RS-232C(1CH), USB(1CH)
Modbus slave
supported via
RS-232C port
Data storage method at
power off
Latch area setting at Basic parameter
Max. base expansion 1 stages 3 stages 3 stages 7 stages Max. 15m
Internal consumption current 940mA 960mA
Weight 0.12kg
Note
- Supported functions according to CPU OS version: the following OS version and XG500 version is needed for
each function
CPU OS XG5000 Function Remark
V3.0 V3.0
SFC, ST language
Automatic assignment variable
-
V3.1 V3.1 Event input module(XGF-SOEA) -
V3.2 V3.2
Effective conversion value, alarm function of analog input
module
-
V3.4 V3.3
User defined function/function block for XGK
Instruction for positioning (APM/XPM): VRD, VWR, XVRD,
XVWR
-
V3.50 V3.4
Enhanced password function (in order to connect, XG5000
V3.4 or above is needed.)
You can disable the Reset/D.Clear switch
Version information is indicated to two decimal places
(_OS_VER_PATCH flag added)
-
To Next Page
Loading...