LSIS XP30-BTE - Page 36

2. Troubleshooting
35
5
Paste the
“HMIStartup.exe” file into
[Flash Disk].
6
Please replace the original
file if it is exist
7
Double click the
HMIStartup.exe to operate
main menu and check
whether it works normally
Remark
(2) (1) You can find HMIStartup.exe from XP-Builder installed folder
(3) – [Program files] -> [LSIS] -> [XP Builder 1.3x] -> [XP-Runtime], then you can see following 3 folders:
(4)
(5)
(6)
These 3 folders are engine file for XGT Panel. (ECONOMIC is for BTE/TTE type)
Please copy the Startup.exe from the folder, and paste it to your USB memory stick(Change the file name
as HMIStartup)
(2) If XGT Panel still not work normally after replacing startup file, please replace the engine folder in
[FlashDisk] similarly(Change the folder name as “LSISProduct”)