LSIS XP40-TTA - Page 23

Chapter 3. Standard Specification
3-2
Remark
(1) IEC(International Electro technical Commission)
: International private group facilitating international cooperation of electric/electronic standardization, issuing international
standards and operating the compliance evaluation systems.
(2) Pollution degree
: As an index representing the pollution degree of an environment to determine the insulation of a device, pollution degree 2
generally means the status generating non-conductive contamination. However, it also contains the status generating
temporarily conduction due to condensation.
(3) Radiated electromagnetic field noise for XP30-BTE(TTE) is 80 ~ 1000MHz, 10 V/m
(All others are same as shown on the table)
(1) General Specification for XP40-TTA(TTE)
No.
Category
Standard Related standard
1
Operating
Temperature
0 ℃∼ +50 ℃
-
2
Storage
Temperature
-20 ℃∼ +60 ℃
-
3
Operating
Humidity
10 ∼ 85%RH, non-condensing.
-
4
Storage
Humidity
10 ∼ 85%RH, non-condensing.
-
5
Vibration
Resistance
Occasional vibration count -
Frequency Acceleration Frequency
10 times for each
X, Y, Z axis
IEC 61131-2
5 ≤ f < 9 ㎐
-
5 ≤ f < 9 ㎐
9 ≤ f ≤ 150 ㎐ 9.8 ㎨ (1G) 9 ≤ f ≤ 150 ㎐
Continuous vibration
Frequency Acceleration Frequency
5 ≤ f < 9 ㎐
-
5 ≤ f < 9 ㎐
9 ≤ f ≤ 150 ㎐ 4.9 ㎨ (0.5G) 9 ≤ f ≤ 150 ㎐
6
Shock
Endurance
* Maximum shock acceleration: 147 ㎨ (15G)
* Duration time: 11 ㎳
* Pulse wave: half sine pulse (3 shocks per axis, on X, Y, Z axis)
IEC 61131-2
7
Noise
Immunity
Square wave
Impulse noise
DC: ±800V
-
Electrostatic discharge
Immunity
± 4kV (Contact discharge)
IEC61000-4-2
Radiated
electromagnetic field
noise
80 ~ 1,000 MHz, 10 V/m
IEC61131-2
IEC61000-4-3
Fast transient &
Burst noise
Category
Power module
Communication
interface
IEC61131-2
IEC61000-4-4
Voltage
2 kV 1 kV
8 Environment
Free from corrosive gases and excessive dust -
9
Operating
height
Up to 2,000m (6,562 ft) -
10
Pollution
degree
2 or less
-