Chapter 3. Standard Specification
3-8
Remark
(1) Notice in connecting with power
: If you connect DC power to the device using AC power, the product doesn’t work. Please be careful when connecting.
(2) FG connection
: Use
⑤
FG terminal (Chapter 2.1) for FG of the device.
⑮
FG (Chapter 2.1) is for FG terminal of extension card.
(Except XP30-BTE , XP30-TTE and XP50-TTE)
(3) Prevention tape of Battery discharge
: There is prevention tape is to prevent the battery discharge. In order to use backup, remove the prevention tape.
(4) Battery operation and duration
: Battery is used to reserve backup data and RTC (data/time) when power is off.
Because battery is used when power is off, battery is not consumed when power is on.
(5) LCD Backlight replacement
: In XP70-TTA/AC, XP80-TTA/AC, XP90-TTA/AC, LCD backlight is replaceable.
To Next Page
Loading...
