Ch.6 Viewing Information of PLC Connection Status
6-1
Chapter 6 Viewing Information of PLC Connection Status
You can see the diverse information including XGT Panel’s and PLC’s CPU information through View PLC Connection Status
Information.
[Method]
(a) Select [PLC Information] in the menu.
(b) Select the designated PLC. The listed PLC is the same as connection number which is set at [Common - Project Property
Setting – PLC/Device settings] in XP-Builder.
(c) Press [SHOW INFO]
(d) You can check the connection information of XGT Panel, information of PLC CPU, history of error, mode conversion, PLC
power cut and system.
Remark
You can check the status of PLC connection after project data is transmitted into XGT Panel.
To Next Page
Loading...
