LSIS XP40-TTA - Page 64

Chapter 10. Installation and Wiring
10
-
4
Remark
Because the product can be affected by dust, use the anti-vibration rubber packing.
(3) Installation location
• When installing the XGT Panel, consider screen and use of touch.
• When you don’t see within the following angle, you may not see clearly. When installing, consider angle.
Item Angle (left and right)
Upper Lower
XP30-BTE 45 deg. 40 deg. 20 deg.
XP30-TTE 80 deg. 70 deg. 70 deg.
XP30-BTA 45 deg. 40 deg. 20 deg.
XP30-TTA 80 deg. 70 deg. 70 deg.
XP40-TTA(TTE) 65 deg. 50 deg. 60 deg.
XP50-TTE 45 deg. 20 deg. 20 deg.
XP50-TTA 65 deg. 50 deg. 60 deg.
XP70-TTA 65 deg. 45 deg. 65 deg.
XP80-TTA 65 deg. 45 deg. 75 deg.
XP90-TTA 75 deg. 50 deg. 60 deg.
Remark
1) Because XP30-BTA (BTE) uses STN Mono LCD, it has poorer clearness and expression angle.
2) XP30-BTA (BTE) can adjust Contrast. Adjust Contrast according to environment.