Record and save data, valid only when lidar receives data in real time
When paused, view the previous frame;
When playing, rewind (click multiple times to
select 2x, 3x, 1/2x, 1/4x and 1x speed)
Click to start playing after the point cloud file is loaded
When playing, click to pause
When paused, view the next frame;
When playing, fast forward (click multiple times
to select 2x, 3x, 1/2x, 1/4x and 1x speed)
Drag the progress bar or enter the frame number to skip to the specified
position
Open lidar parameter
form
The upper part of the form shows the lidar
configuration. The parameters include local IP,
destination IP, subnet mask, gateway, data port,
device port, and motor speed setting
(5Hz/10Hz/20Hz can be selected under
combobox), whether to obtain the local time, Mac
address information, and device packet sending
interval.
The lower part shows the real-time status
Show/hide measurement grid
Mark the selected points in the point cloud image
Pause point cloud image and data generating
Select point clouds from different angles
Show/hide the column on the left
Three-view option: set the observation angle from
top, front, and left.
To Next Page
Loading...