Need help?Do you have a question about the LTO PBM8.250/ MKII and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Type | Passive |
| Inputs | 8 |
| Outputs | 2 |
| Power | Passive (no power required) |
| Material | Metal |
Alerts regarding electric shock risk, internal components, and external exposure.
Guidelines for moving equipment safely and proper product disposal.
Information on permissible noise exposure levels and hearing protection.
Details on mono, stereo inputs, channel equalization, and auxiliary sends.
Highlights preamps, headroom, feedback control, EQ, effects, recording, and output options.
Specifies amplifier power ratings for PBM8.250 and PBM8.500 models.
Procedure for connecting microphone, setting controls, and connecting speakers for initial use.
Guidance on adjusting channel and master levels, applying equalization, and monitoring output.
Instructions for connecting a stereo keyboard to channel 7/8.
Details on mono (1-6) and stereo (7-10) input channels, including MIC/LINE options.
Explanation of channel level adjustment and panorama (balance) control for stereo imaging.
Describes DSP/FX send and MON/AUX1 pre-fader send controls.
Explains the 3-band EQ controls (HI, MID, LOW) for input channels.
Details the 20 dB PAD button for reducing input signal level and increasing headroom.
Explains stereo graphic EQs for Main/Monitor and feedback terminator functions.
Describes the LED display for monitoring the monitor output level.
Details master monitor/main level controls and corresponding LED level displays.
Explains the +48V phantom power switch and amplifier mode selection.
Describes MONITOR, MAIN OUT, HEADPHONE, and AUX2 output jack functions.
Details STEREO RETURN, TAPE IN/OUT switches and connectors for audio input/output.
Explains selection of 16 factory presets and 16 variations for 256 total effects.
Details DSP MUTE, PEAK LED, and controls for sending DSP effects to Monitor/Main.
Describes the socket for connecting an external footswitch to control the digital multi-effect.
Details the main power ON/OFF switch and AC inlet with fuse holder.
Describes the 4-way speakon and 1/4" phone jacks for speaker connections.
Procedure for setting input/output levels, gain staging, and monitoring for optimal performance.
Diagrams and explanations for 1/4" stereo (TRS) and mono (TS) jack connections.
Details the 1/4" stereo TRS jack for insert points.
Explains 3-pin XLR male plug and line socket for balanced mic/line connections.
Details the Speakon connector for connecting to passive speaker cabinets.
Explains using the amplifier in MAIN+MAIN mode for driving two main speaker cabinets.
Details using the amplifier in MAIN+MONITOR mode for driving main and stage monitor speakers.
Explains using the amplifier in BRIDGE mode to drive a single speaker cabinet with combined power.
Lists all 16 presets with their descriptions and controllable parameter ranges.
Illustrates the internal signal paths and connections of the PBM8 mixer.
Details input channel specifications, frequency response, distortion, gain, and impedances.
Provides specifications for the DSP section and main mix noise levels.
Lists power supply voltage, consumption, and amplifier output ratings for both models.
Specifies fuse ratings for different voltage ranges and physical dimensions of the unit.
Provides net and gross weight specifications for PBM8.250 and PBM8.500 MKII.
Instructions for warranty registration, product return, and required documentation.
Outlines the 1-year limited warranty, exclusions, and consumer rights.
To Next Page