LubeCon Smart Lube 2000 User Manual

LubeCon
Smart Lube 2000
Multi Function Lubrication System
Controller
The purpose of this document is to provide a basic
knowledge of the LubeCon System for the Extrusion
Maintenance Department so that it may be used to both
maintain the system and to facilitate its implementation
into the remaining run-out tables.

LubeCon Smart Lube 2000 Specifications

General

Brand	LubeCon
Model	Smart Lube 2000
Category	Controller
Language	English

Summary

Main Controller Display

Channel Status Representation

Explains how channel statuses like "Wait" and cycle counts are displayed using symbols.

Circuit Board Overview

Channel Regions and Lug Assignments

Details the division of the circuit board into channel regions and the function of terminal lugs.

Lube Request Signal Wiring

Describes the wiring of the "Lube Request" signal across channels to the pump station.

Solenoid Output and Indicator

Explains solenoid output connections and the LED indicator for solenoid firing status.

Input and Power Connections

Magnetic Pickup Input Configuration

Details the signal, +24v, and ground connections for magnetic pickups via specific buses.

+24VDC Power Supply

Explains how +24VDC is supplied from the pumping station to the controller.

Routine Checks

Daily Inspection Procedures

Outlines daily checks for channel counts, lube jet alignment, and pump station status.

Pump Station Control Panel

Low Pressure Alarm System

Describes the programmable low pressure alarm option and its integration for safety.

Controller Setup and Programming

Accessing Programming Mode

Explains how to enter program mode using the <Prog> button and password.

Channel 1 Configuration Settings

Details specific settings for Channel 1, including run mode, cycle counts, and inter-count delay.

Lube Cycle Control Parameters

Covers parameters like "on time", "lube delay", and "inter count delay" controlling lubrication frequency.

Input Configuration and Restart

Explains enabling other inputs like low/high pressure shutoff and restarting a channel.