Lucent Technologies DEFINITY Enterprise Communications Server - Page 67

DEFINITY® Enterprise Communications Server Release 7
Console Operations
555-230-700
Issue 4
June 1999
Using the Features
61Using Features for Internal Use
4
Immediate Manual Override
When you activate this option, the currently active routing plan is changed
immediately to a new plan. The new plan remains in effect until the override is
deactivated manually or until the next scheduled routing plan takes effect.
To activate Immediate Manual Override:
NOTE:
The Immediate Override lamp is lit if this option is already active.
1. Press the Immediate Override button.
■ The Immediate Override lamp lights.
■ The first line of display shows:
OLD ROUT PLAN: x ENTER NEW PLAN:
(Where x is a number from 1 through 8 that identifies the routing
plan currently in effect.)
2. Use the touch-tone buttons to enter the number (from 1 through 8) of the
new routing plan.
■ The Immediate Override lamp remains steadily lighted
■ Display updates to:
OLD ROUTE PLAN: x ENTER NEW PLAN: y
(Where y is the number you just entered.)
NOTE:
If you pressed any button other than the 1 through 8 buttons on the
dialpad, the Immediate Manual Override attempt is denied; the
display returns to the Normal mode. You must repeat step 1 to try
again.
3. Press the Immediate Override or Normal Mode button.
■ The Immediate Override lamp remains steadily lighted.
■ Immediate Manual Override is active.
To deactivate Immediate Manual Override:
1. Press the Immediate Override button.
■ The Immediate Override lamp goes out.
■ Scheduled daily routing plan goes into effect immediately.