MERLIN LEGEND Communications System Release 6.1
System Programming and Maintenance (SPM)
555-661-140
Issue 1
August 1998
Programming with SPM
Page 79
Upgrading the System
■ Table 11. Lists the features added with Release 4.0 of the
communications system.
— When you upgrade from Release 3.1 to Release 4.0, you
must program these features as the last step of the
upgrade procedure.
— When you upgrade from Release 3.0 to Release 4.0, you
must program the features listed in Table 10, then the
features listed in Table 11.
— When you upgrade from Release 2.0 or 2.1 to Release 4.0,
you must program the features listed in Table 9, then the
features listed in Table 10, then the features listed in Table
11.
— When you upgrade from Release 1.1 to Release 4.0, you
must program the features listed in Table 8, then the
features listed in Table 9, then the features listed in Table
10, then the features listed in Table 11.
— When you upgrade from Release 1.0 to Release 4.0, you
must first program the features listed in Table 7, then the
features listed in Table 8, then the features listed in Table 9,
then the features listed in Table 10, then the features listed
in Table 11
■ Table 12. Lists the features added with Release 4.1 of the
communications system.
— When you upgrade from Release 4.0 to Release 4.1, you
must program the features listed in Table 12.
— When you upgrade from Release 3.1 to Release 4.1, you
must program the features listed in Table 11, then the
features listed in Table 12.
— When you upgrade from Release 3.0 to Release 4.1, you
must program the features listed in Table 10, then the
features listed in Table 11, then the features listed in Table
12.
To Next Page
Loading...
Need help?
General
