Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-632Memory Card
3
Console/Display Instructions Additional Information PC
! Respond to the prompt.
! Observe the backup progress screen.
!Observe the backup completion screen.
!Return to the System Programming menu.
Select
([LW three times.

Automatic Backup 3
To preserve the most recent copy of your customized system data, you can
program the system to automatically backup programming information onto the
translation memory card. Automatic backups may be set for daily or weekly
operation. If automatic backup is activated, the time may be set for daily backup
(factory setting is 2:00 am) or the time and day may be set for weekly backup
(factory setting is 2:00 am Sunday).
The system places the automatic backup into one of two designated files:
$872%$&. and $872%$&.. If both files are empty, the system places the backup
in
$872%$&. If both files already contain backups, the system selects the older
of the two files and overwrites it. The system performs this file “toggle” each time it
performs an automatic backup.
%DFNXS GJMFOBNF 
filename = file selected in Step 5 or
entered in Step 6
'R\RXZDQWWRFRQWLQXH"
<HV
Select 1R to terminate the backup.

1R
Go to Step 11.
([LW
Select <HV to continue the backup.

%DFNXS GJMFOBNF 
filename = file selected in Step 5 or
%DFNXSLQ3URJUHVV ,
entered in Step 6
3OHDVH:DLW
xx % = percentage of backup completed
YY FRPSOHWHG
([LW
Ã
%DFNXS OOOOOOOOOOO 
nnnnnnnnnnn = backup filename
%DFNXS6XFFHVVIXOO\
&RPSOHWHG
([LW

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English