DLP-523: Detailed Level Procedure 363-206-285
Page 29 of 30 Issue 2, February 2000
DDM-2000 OC-3 MULTIPLEXER
56. Remove old IMA LAN and install replacement IMA LAN in required slot of
LOW SPEED group.
57. Connect cable to RJ-45 connector on BBF9 IMA LAN or optical cable to
optical connector on BBF10 IMA LAN.
Response: FAULT LED on IMA LAN circuit pack lights and may
remain lighted for about 40 seconds and then goes off.
58. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
To Next Page
Loading...