Luma LUM-501-NVR Series User Manual

LUM-501-NVR Series
NVR Surveillance Recorder
Web Interface
Quick Start
Guide

Luma LUM-501-NVR Series Specifications

General

Hard Drive Bays	1
Compression	H.265+/H.265/H.264+/H.264
Remote Viewing	Yes
Motion Detection	Yes
Video Output	1x HDMI, 1x VGA
Audio Input/Output	1/1
USB Interface	2 × USB 2.0
Consumption (without HDD)	≤10W
Video Resolution	5MP/4MP/3MP/1080P/720P
Operating Temperature	0°C to +40°C

Summary

Safety Tips

Box Contents

Set Up the Hardware

Install the Luma Utility

Download and Install the Luma Utility

Guide to downloading and installing the Luma Utility software.

Locate the NVR

Instructions on how to find the NVR using the Luma Utility.

Edit the Network Settings

Set the IP Address

Instructions on how to set a static IP address for the NVR.

Change the Server and HTTP Ports

Guide to changing default server and HTTP ports for security.

Start the Web Interface

Get the Luma Plug-In

Steps to download and install the necessary browser plug-in for the web interface.

Check the Cameras

Edit Camera Settings (Optional)

How to adjust individual camera settings via the web interface.

Set Up Dynamic DNS

Set Up Port Forwarding

Port Forwarding for Attached Cameras

Guide to configuring port forwarding for cameras attached directly to the NVR.

Change Camera Passwords

Create Users and Set Passwords

Change the Admin Password

Instructions on how to modify the default administrator password.

Add Additional Users

Guide to creating new user accounts with specific permissions.

Calibrate the System Time

Synchronize the Time

How to set the correct time zone and synchronize system time using NTP.

Disable DST if Necessary

Instructions on disabling Daylight Saving Time if not applicable.

Next Steps

Support

Need Help? Contact Tech Support!

Information on how to get technical assistance and support resources.

3-Year Limited Warranty

Details about the product's warranty coverage and terms.