EasyManua.ls Logo

Lumag HOS5A User Manual

Lumag HOS5A
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Distribution Limited
Hydraulic Log Splitter
Operator’s Manual
HOS5A
FOR YOUR SAFETY
READ AND UNDERSTAND THE ENTIRE MANUAL
BEFORE OPERATING THIS MACHINE
Question and Answer IconNeed help?

Do you have a question about the Lumag HOS5A and is the answer not in the manual?

Lumag HOS5A Specifications

General IconGeneral
Splitting Force5 tons
Max Log Length520 mm
Engine TypeElectric
Voltage230 V
Max Log Diameter250 mm

Summary

Safety Regulations

General Safety Instructions

Key guidelines for safe operation, including orderliness and environmental protection.

Safety and Maintenance Procedures

Attendance and Maintenance

Instructions for regular checks, cleaning, and maintenance of the equipment.

Pre-Operation Safety and Checks

Procedures for disconnecting power, avoiding unintended starts, checking equipment, and general operational awareness.

Safe Operation Guidelines

Safe Operation and Positioning

Guidance on operator positioning, log placement, and safe working practices.

Hearing Protection Warning

Warning about hearing damage from noise and requirements for hearing protectors.

Putting into Operation

Working Area Safety and Setup

Ensuring adequate space, stable placement, good lighting, and safety checks before operation.

Live Mains Hazard Warning

Critical warning about live electrical hazards and the importance of loosening the air bleed screw.

Connecting to Mains Supply and Operation

Mains Connection Requirements

Critical instructions for safely connecting the equipment to the mains power supply.

Operation Guidelines and Safety

Pre-operation advice, hydraulic airflow, log dimensions, and two-hand operation safety.

Splitting Operation

Log Placement and Splitting Process

Detailed steps for placing the log and initiating the splitting process using two-hand controls.

Pressure Warning and Jamming

Warning against excessive piston pressure and instructions for jammed logs.

Maintenance and Troubleshooting

Pre-Maintenance Procedures

Essential steps before starting any cleaning or maintenance tasks.

Cleaning and Oil Handling

Procedures for cleaning, oil recommendations, and checking the hydraulic oil level.

Oil Level Check Procedure

Detailed steps for checking the hydraulic oil level using the dipstick, including gasket checks.

Hydraulic Oil Replacement and Disposal

Instructions for oil replacement and guidelines for environmentally sound disposal.

Electrical System and Troubleshooting

Safety for electrical works, cable specs, and comprehensive troubleshooting guide.

Technical Specifications and Support

Technical Specifications

Detailed technical specifications for the HOS 5A log splitter.

Warranties & Customer Support

Details on warranty, contact information, and EU conformity.