Need help?Do you have a question about the Lumagen Radiance Pro and is the answer not in the manual?
General| Audio Outputs | HDMI |
|---|---|
| Frame Rate Conversion | Yes |
| 3D Support | Yes |
| Control Interfaces | RS-232, Ethernet, IR |
| Video Inputs | HDMI |
| Video Outputs | HDMI |
| HDR Support | HDR10, HLG, Dolby Vision |
| Resolution Support | Up to 4K UHD |
| Color Space Support | BT.709, BT.2020 |
| Audio Support | Dolby Atmos, DTS:X, PCM |
| Type | Video Processor |
End User License Agreement for Darbee Visual Presence technology.
Information on FCC, ICES-003, and CISPR 22 compliance.
Important safety warnings and precautions for operating the equipment.
Explains manual conventions and device navigation methods.
Instructions for unpacking the unit and verifying contents.
Step-by-step guide for installing batteries in the remote control.
Recommendations for proper unit installation and placement.
Description of the front panel interfaces for both models.
Details the rear panel connectivity options for both models.
Explains the operation of the remote control buttons.
Illustrates the internal functional blocks and signal flow.
Explains input memories and output configurations for saving settings.
Step-by-step instructions for connecting and powering on the Radiance unit.
Describes a common setup with the receiver after the Radiance processor.
Details routing audio and video separately to the Radiance and receiver.
Explains a setup using the AVR to switch sources before the Radiance.
How to power the unit on/off and select input sources.
How to select and use input configuration memories.
Adjusting aspect ratio and zooming the input video image.
Displaying status information and accessing on-screen help.
Utilizing quick keys for rapid access to common functions.
Selecting output settings like Mode, CMS, and Style.
Defining custom HDMI video timing and display settings.
Calibrating color points, gamma, and using 3D LUTs.
Adjusting the video output's gamma curve.
Calibrating color points and using 3D LUTs for color management.
Selecting input settings based on resolution, memory, and mode.
Adjusting picture settings like HDR Intensity Mapping per input.
Setting input black and white levels for optimal image reproduction.
Selecting output color space and correcting color decoder errors.
Adjusting chroma timing and compensating for image size differences.
Stretching images and masking video source edges.
Controlling letterbox zoom and deinterlacing interlaced sources.
Accessing and configuring the Darbee video enhancement feature.
Managing EDID and HDCP compliance for HDMI inputs.
Automatically detecting or setting input aspect ratios.
Details support for HDMI 2.0 audio formats and bitstream formats.
Controls audio muting duration during input changes.
Explains why calibration is crucial for optimal image quality.
Covers calibration steps specific to HDR sources and displays.
Details calibration for HDR sources on SDR displays.
Outlines calibration steps for HDR sources on HDR displays.
Summarizes HDR calibration considerations and techniques.
Configures system-wide settings like menu mode and timeouts.
Generates test patterns for display calibration and setup.
Manages configuration memory usage and fan speed settings.
Instructions for saving, undoing, and loading configurations.
Details the various 3D video types supported and conversion options.
Configures 3D output modes and setup procedures for displays.
Guides for displaying 3D video on non-compliant or older displays.
Manually setting 3D input modes for non-compliant video sources.
How to access the Darbee Visual Presence™™ enhancement menu.
Details controls for Darbee enhancement levels and modes.
Lists direct commands for less common functions.
Direct commands for temporary output resolution testing.
References Tech Tips for menu shortcuts, IR, and RS-232 commands.
Lists input capabilities for HDMI, HDCP, and upgrade options.
Details processing capabilities like scaling, HDR mapping, and enhancements.
Lists output resolutions, HDMI capabilities, and audio support.
Covers control interfaces, power supply, and physical dimensions.
To Next Page
