EasyManua.ls Logo

Luminar 62565 - Warning Symbols and Definitions; DANGER Symbol Definition; WARNING Symbol Definition; CAUTION Symbol Definition

Luminar 62565
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 2 For technical questions, please call 1-888-866-5797. Item 62565
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK,
EXPOSURE TO EXCESSIVE UV RADIATION, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS
Lighted Lamp is HOT:
WARNING – To reduce the risk of FIRE, ELECTRIC SHOCK,
EXPOSURE TO EXCESSIVE UV RADIATION, OR INJURY TO PERSONS:
1. Turn off/unplug and allow to cool
before replacing bulb.
2. Bulb gets HOT quickly!
Only contact On/Off Button/Plug when turning on.
3. Do not touch hot lens, guard, or enclosure.
4. Do not remain in light if skin feels warm.
5. Do not look directly at lighted lamp.
6. Keep lamp away from materials that may burn.
7. Use only with 250 watt or smaller bulbs.
8. Do not touch the bulb at any time. Use a soft cloth
instead. Oil from your skin may damage the bulb.
9. Do not operate the portable luminaire
with a missing or damaged guard,
lamp containment barrier, or UV filter.
10. Avoid electric shock. Do not use with an
extension cord near water or where water may
accumulate. Keep lamp at least 16 feet (5m) from
pools and spas. Keep plugs and receptacles
dry. Use only on GFCI-protected circuits.
Do not submerge the Light in water.
11. The Light is not waterproof. Use extreme
caution in any wet location.
12. Be careful when placing tripod.
Make certain that the area is clear of debris
and obstructions that may bump the Light.
13. Do not obstruct walkways or
common areas with the cord.
14. Maintain labels and nameplates on the Light.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.