Lutron Electronics Caseta PD-5ANS - Page 105

105
by Lutron
Multi-Location Installation - Caséta Claro Smart Switch with Claro Smart Accessory Switches (DVRF-5NS/DVRF-AS)
16
Remove existing switch from wall at Location 3
11
Remove existing switch from wall at Location 2
12
Tag and disconnect wires from the existing switch
Ground (Green / Bare Copper)
Location 2
Location 2
Place tags - to identify wires
on different color screws
Different Color Screws
Location 3
14
Mount the Claro Smart accessory awitch
Location 2
15
Attach the wallplate
Location 2
‘snap’
Wallplate
Adapter
Wallplate
13
Connect the Claro Smart accessory switch for Location 2
Location 2
Tagged Wire
Ground
(Green Wire)
Red
Black
Blue
Match noted wire
color from Step 8
tied to blue wire.