Lutron Electronics Caseta PD-5ANS - Page 118

118
by Lutron
Setting Dimmer Phase on a Caséta Wireless ELV+ Dimmer (PD-5NE)
On
Off
Darker
Brighter
ELV+ dimmer
Adjusting for Load Types -
Configurable between ELV and MLV load types
1
Pull out the FASS and then push back in
2
Enter
0
5
10
15
6
sec.
UNTIL
3
Select
HOLD
Hold
a.
A status LED starts
flashing
Status LED stops flashing
4
Save
TAP
UNTIL
HOLD
Favorite
NOTE: Top LED Blinking - Forward Phase (MLV)
Bottom LED Blinking - Reverse Phase (ELV)
NOTE: Changes will not be saved if dimmer
times out (no button press for
1 minute) or if power is turned off.
+
TOP status LED
starts flashing
=
Forward-Phase
(MLV) selected
Hold
b.
TAP
+
BOTTOM status
LED starts flashing
=
Reverse-Phase
(ELV) selected
OR