23
by Lutron
1
Identify existing wiring
Two switches control the fan (3-way installation)
2
What you need for a 3-way installation
+
+
WARNING! Shock Hazard. May result in Serious
Injury or Death. Turn off power at circuit breaker
before installing the unit.
4
Turn power off at circuit breaker
5
Remove existing switch from wall
6
Tag and disconnect wires from the existing switch
Place tag - to identify wire on
different color screw
Different
Color
Screw
Access to
Neutral is
required
Ground
(Green /
Bare Copper)
3-Way Installation - Caséta Wireless Fan Control with Pico Remote Control (PD-FSQN)
Location 1 Location 2
Fan control
PD-FSQN
Pico wallbox adapter
PICO-WBX-ADAPT
- If one switch controls the fan (single-pole installation)
See quick-start guide that came with your control
- If three or more switches control the fan
(multi-location installation) See page 83 for details
Important note:
3
Choose a location for your Caséta Wireless fan control
Choose which location you want the Caséta Wireless fan control installed in.
This will be Location 1.
Location 1
Location 1
+
To Fan
Two Claro wallplates
CW-1
Pico remote control
for fans
PJ2-3BRL-XXX-F01
To Next Page
Loading...