Lutron Electronics Caseta PD-5ANS - Page 28

28
by Lutron
7
Ganging and derating
Total Dimmable LED Wattage Incandescent/Halogen Total Wattage
0 W + 600 W 500 W 400 W
1 W – 25 W + 500 W 400 W 300 W
26 W – 50 W + 400 W 300 W 200 W
51 W – 75 W + 300 W 200 W 100 W
76 W – 100 W + 200 W 100 W 50 W
101 W – 125 W + 100 W 50 W 0 W
126 W – 150 W + 0 W 0 W 0 W
A
B
C
B
B B
C
B
A
8
Connect the Caséta Diva Smart dimmer
Tagged Wire
Ground
(Green Wire)
Red
Black
Blue
9
Mount the Caséta Diva Smart dimmer
10
Attach the wallplate
‘snap’
11
Remove existing switch from wall at Location 2
3-Way Installation - Caséta Diva Smart Dimmer with Pico Remote Control (DVRF-6L)
12
Tag and disconnect wires from the switch
Ground (Green / Bare Copper)
Different
Color
Screw
Important note:
Ganging units together may reduce the dimmer’s maximum wattage
rating. See the chart below for maximum wattage information.
Wallplate
Adapter
Wallplate
Location 1
Location 1
Location 2
Place tag - to identify wire on
different color screw
Location 2
Location 1
Note: Diva Smart controls don’t have fins but derating is
still required. See the chart below.