41
by Lutron
1
Identify existing wiring
Two switches control the lights (3-way installation)
2
What you need for a 3-way installation
WARNING! Shock Hazard. May result in Serious
Injury or Death. Turn off power at circuit breaker
before installing the unit.
4
Turn power off at circuit breaker
5
Remove existing switch from wall
6
Tag and disconnect wires from the existing switch
Place tag - to identify wire on
different color screw
Different
Color
Screw
Ground
(Green /
Bare Copper)
3-Way Installation - Caséta Wireless Neutral Switch with Mechanical Toggle Switch (PD-5ANS/PD-6ANS)
Location 1 Location 2
- If one switch controls the lights (single-pole installation)
See quick-start guide that came with your switch
- If three or more switches control the lights
(multi-location installation) See page 73 for details
Important note:
3
Choose a location for your Caséta Wireless switch
Choose which location you want the Caséta Wireless switch installed in.
This will be Location 1.
Location 1
Location 1
+
Existing mechanical
toggle switch
+
Claro wallplate
CW-1
Switch
PD-5ANS/PD-6ANS
Neutral
connection
required
To Next Page
Loading...