Blowing adapter and optional spray bottle
The spray bottle can be attached to your LUX sora in
order to disperse water. Connect the spray bottle to the
handle. Mount the electrical hose on the outlet vent of
the vacuum cleaner by means of the adaptor attached.
The spray bottle is dispensed by closing the two
pinholes on top of the main body. Close the holes by
applying finger pressure on it. The amount and size
distribution of the spray droplets can be adjusted by
turning the ring in front of the nozzle.
Please note
The blowing function cannot be regulated by the sliding
switch on the handle. Once you remove the electrical hose
from its outlet, the LUX sora starts automatically and runs
on performance setting “3”.
For your safety:
! Do not use the spray bottle with corrosive or combustible liquids.
! Do not use the spray bottle while vacuuming. Only use the spray
bottle in combination with the blowing adaptor attached to the
outlet of the appliance.
! Always hold the spray bottle upright.
To Next Page
Loading...