Active odour filter
The active odour filter is made of granular charcoal. Due to
its immense surface structure this filter is capable of
removing bad smells and odours resulting from decaying
organic substances in the filter bag. At the same time, the
active odour filter acts as a motor protection filter.
In order to change the active odour filter, take out the
filter bag first. Press the upper flap of the holding grid.
Pull the grid out and remove the filter pad. Insert a new
filter pad into the grid with the printing facing outwards.
Push the grid back into its original position and hook in
the upper flap. Re-insert the filter bag. When you have
closed the hood, the appliance is ready for operation.
After inserting the active odour filter has an effective life
span of approximately one year, depending on use.
HEPA hygiene micro filter
The HEPA hygiene micro filter collects the smallest dust
particles.
It is of particular importance for people who are allergic to
household dust, but also prevention for non-allergic
people. The HEPA hygiene micro filter ensures that the
air exhausted is cleaner than the air in the room.
In order to change the HEPA hygiene micro filter, open
the appliance hood and press the flap located at the side
of the HEPA hygiene micro filter. When inserting the new
HEPA hygiene micro filter, make sure the flap is facing
towards the cable drum. Then close the hood. The
appliance is now ready for operation.
After inserting, the HEPA hygiene micro filter has an
effective life span of one year, depending on usage.
The HEPA hygiene micro filter and the active odour filter
can be disposed with your household waste.
To Next Page
Loading...