PARKING AND STORING
Parking
The LUX sora and the floor nozzle can stand on their
own due to the ergonomically shaped electrical tube.
Place the electrical tube in an upright position until the
joint of the floor nozzle clicks into place. It is of
importance that the electrical tube is leaning forward in a
straight line, otherwise it could tip over. In the parking
position, the LUX sora will remain at the performance
level previously selected.
Carrying
Use the hand grip on top of the appliance to carry the
LUX sora around. Alternatively, carry the appliance
using the recessed grip located at the bottom front of
the appliance.
Storing
Always store your LUX sora in a dry space at room
temperature with the power switched off, the electrical plug
disconnected and the power cord rewound. Put the appliance
upright and attach the electrical tube as shown in the picture.
To Next Page
Loading...