Read all instructions prior to using your new product.
ASSEMBLY INSTRUCTIONS
• Slide light head onto base connector. NOTE: To tamper-
proof the light head, install the optional set screw using the
included allen wrench. Do not over tighten.
USING YOUR LUX TORONTO LAMP
• Use only with the included 24V 0.625A power supply.
• Turn on the light by pressing gently on the power switch on
the end of the light bar.
• Press the power switch again to cycle through the three
brightness levels (420, 200, 20 lumens).
• The Toronto’s silicone fl exible neck is adjustable, however
the aluminum light bar is not.
SAFETY INFORMATION:
• The fl exible external power supply cable cannot be
replaced; if the cable is damaged the entire power supply
must be replaced.
• For indoor use only; do not use outdoors.
• Switch off the light before disconnecting the power supply.
• Do not look directly at the LEDs when they are
illuminated.
CUSTOMER SERVICE:
For questions and assistance please contact us at:
800.922.3233 • customerservice@mightybright.com
To Next Page
Loading...