LuxaFlex PowerView Motorisation - Connect Hub to Network; Connect Hub via Wi-Fi or Ethernet to Router

CONNECT AND SET UP HUB
10
CONNECT HUB TO INTERNET CONNECTED WIRELESS ROUTER:
Connect using an active Wi-Fi network:
5.4
OPEN THE POWERVIEW® APP ON YOUR
MOBILE DEVICE AND FOLLOW THE ONSCREEN
INSTRUCTIONS TO PROPERLY CONNECT TO AN
ACTIVE WIFI NETWORK
(The Hub will indicating it is ready to join the PowerView® Network, once the
Hub has been connected to the home network).
CONNECT USING AN ETHERNET CABLE:
(Optional)
5.5
CONNECT THE ETHERNET CABLE FROM THE
HUB TO AN OPEN LAN PORT ON YOUR ROUTER
(If connecting the Hub to the home network via Ethernet, connect the Hub
to the router, before connecting the Hub to power).