LuxaFlex PowerView Motorisation - Pairing Remotes: Target Remote Actions; Target Reset, Source Activation, and Target Hold

5
”TARGET” REMOTE:
3.2
PRESS THE RESET BUTTON FOR SIX
SECONDS
Using a paper clip, PRESS and HOLD recessed Reset
button on back of target remote for 6-10 seconds.
If necessary, remove back cover.
”TARGET” REMOTE:
3.3
CLOSE THE COVER IF NECESSARY
”SOURCE” REMOTE
3.4
PRESS STOP FOR 6 SECONDS
(Keep pressing until the Remote lights start blinking).
”TARGET” REMOTE:
3.5
PRESS STOP AND HOLD
“SOURCE” REMOTE
3.6
PRESS STOP AND RELEASE
PAIRING REMOTES
reset button