STEP 5 CONNECT AND SET UP HUB
CONNECT POWER TO HUB:
5.1
CONNECT ONE END OF THE USB
POWER CABLE TO THE USB POWER
SUPPLY
5.2
PLUG THE USB POWER SUPPLY INTO
AN AC OUTLET OR POWER STRIP
5.3
PLUG THE OTHER END OF THE USB
POWER CABLE INTO THE POWER
PORT ON THE BACK OF THE HUB
Note: During the boot-up process, the Hub’s LED may turn
off and on again. Once the Hub has completed the boot-up
process, the Hub’s LED will turn solid Magenta. Do not interrupt
the boot-up process by cutting power or pressing any buttons
on the back panel of the Hub.
CONNECT AND SET UP HUB
99
Central Hub placement should be considered to
obtain optimal range of the Hub.
To Next Page
Loading...