LuxCraft Double Lawn Glider User Manual

1 - (A) Roof Assembly
1 - (B) Left Leg Assembly
1 - (C) Right Leg Assembly
2 - (D) Seat & Back Assembly
4 - (E) Seat Support Brace
4 - (F) Hanger Arms
1 - (G) Platform
4 - (H) Armrest's
Hardware
8 - 3 1/2" Bolts
8 - 3 1/4" Bolts
4 - 3" Bolts
20 - Washers
20 - Nuts
20 - 2-1/2" Screws
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
Double Lawn Glider Assembly Instructions
Page#
of 5
1

LuxCraft Double Lawn Glider Specifications

General

Material	Poly Lumber
Weight Capacity	500 lbs
Assembly Required	Yes
Seating Capacity	2
Finish	Smooth

Summary

Assembly Instructions

Attach Leg Frames to Roof

Connect Leg Frames to the Roof assembly using 8 x 3 1/2" bolts and washers, ensuring correct orientation.

Attach Corner Brace to Roof

Secure the Corner Brace to the inside of the Roof using 4 x 3" bolts and washers, aligning numbers/letters.

Attach Hanger Arms to Seat Assembly

Connect Hanger Arms to the Seat Assembly using 1 x 3 1/4" bolt and washer per arm, matching numbers/letters.

Attach Brace to Hanger Arm

Attach Brace to Hanger Arm using 1 x 3 1/4" bolt and washer, ensuring correct number/letter alignment.

Attach Seat Support Brace

Secure the Seat Support Brace using 1 x 2 1/2" screw per brace, matching numbers/letters.

Attach Armrest to Seat Assembly

Connect Armrests to the Back & Hanger Arms using 4 x 2 1/2" screws per armrest, matching numbers/letters.

Attach Platform to Hanger Arms

Attach the Platform to the Hanger Arms using the provided hardware, ensuring correct alignment.

Attach Hanger Arms to Roof Hanger

Connect the main Hanger Arms to the Hanger points on the inside of the Roof structure.