Need help?Do you have a question about the Luxman D-103 and is the answer not in the manual?
Instructions for removing the top cover of the unit.
Procedure for setting the laser output power to the correct level.
Adjusting focus balance and fine-tuning laser power for optimal performance.
Procedure to set the tracking error signal's DC offset to zero.
Adjusting gain for tracking and focus servo systems.
Step-by-step instructions for replacing the laser pickup unit.
Instructions for removing the top cover of the unit.
Procedure for setting the laser output power to the correct level.
Adjusting focus balance and fine-tuning laser power for optimal performance.
Procedure to set the tracking error signal's DC offset to zero.
Adjusting gain for tracking and focus servo systems.
Step-by-step instructions for replacing the laser pickup unit.
General| Type | CD Player |
|---|---|
| Dynamic range | 96dB |
| Digital outputs | Coaxial |
| Channel Separation | 90dB |
| Frequency Response | 20Hz - 20kHz |
| Output Level | 2V |
To Next Page
