To ensure the safety of you and others, please make sure to observe the following matters:
Do not ride after you take medications, drink alcohol, or when you are unwell, which may affect your riding ability.
Observe traffic regulations and traffc signs and confirm the surrounding road conditions and scooter conditions at any time to avoid danger.
Wear safety equipment, such as helmet, and appropriate protective clothing if necessary, such as gloves and boots.
Perform a basic check each time before riding, so as to confirm the light, brake, tread and tire pressure and check other parts for looseness or abnormal noise,
and regularly go to Local Service Center for maintenance.
In order to ensure the safety of you and others, please DO NOT use high beam in good lighting conditions. The continuous use of high beam will cause the visual
disturbance to vehicles and pedestrians on the opposite side, thus affecting normal driving.
Please do not make or answer any call during riding, which is likely to cause traffc accidents.
3 4
DESCRIPTION OF COMPONENTS AND PARTS
Installation of Mirrors
Take out the left and right mirrors, insert the hole and rotate the
mirror clockwise to the correct position.
Use the spanner to fasten the nut,make sure the left and right mirror
is on the same line and suitable for the driver’s view.
1
2
DESCRIPTION OF INSTRUMENT DISPLAY
To Next Page
Loading...
Need help?
General
