NANO Version 2.16 February 2017
Page 26 of 27
Q: I have previously used the NANO on several flight and it worked beautifully and gave
some good detail of the flights I made. It seems to have developed a problem where it no
longer obtains GPS data. When I turned it on, the following lights were left illuminated on
the NANO: 2nd Light from the left (GPS), 3rd Light from the left (Flight Recorder), 5th Light
(Red) indicating a problem. None of the lights are flashing - they are fixed solid. I am now
unable to turn the unit off also.
A: SD card is not inserted properly. Use paperclip to reset NANO.
Q: When I press the rocker button for a few seconds to power up the unit, sometimes it
does not do anything.
A: You must push harder to turn on NANO. The button is intentionally made like this in
order to prevent accidental power ups.
Q: I did not figure out how to start recording by moving the rocker button, it shows battery
charge and goes back to displaying the power+GPS leds. Am I doing something wrong ?
A: Recording can be started only if you moving faster than 40km/h, or vario is present.
Rocker button function is only to check battery or event(short press) or long press for
switching off.
To Next Page
Loading...
