15
ENGLISH
Shifting procedure
NOTE! Shift the gear only when engine is running at idle and the speed is below 20 km/h.
Come to complete stop before selecting reverse gear.
Do not force lever. If unable to shift, apply throttle to move snowmobile. Stop
vehicle, then try again.
NOTE: These models: Whenever shifting the gear the snowmobile has to be
completely stopped, otherwise the gear system may get broken.
Electric reverse
Some models: These models are equipped with an electronic reverse (RER),
which is controlled by a RER button.
Reverse shift can be used when the snowmobile is stopped and engine is running
at idle.
Engine is running automatically forward when the snowmobile is started after
stalling or stopping.
Shifting in reverse
With the snowmobile completely stopped and engine running at idle, press and
release the RER button.
1. RER button
The reverse pilot lamp blink and a reverse alarm will sound once every second
with a half a second duration when the snowmobile is engaged in reverse.
Apply throttle slowly and evenly. Allow drive pulley to engage then accelerate
carefully.
To Next Page
Loading...
