MONITORING SYSTEM
PILOT
LAMP(S)
ON
BEEPER
MESSAGE
DISPLAY
DESCRIPTION
—
(blinking)
Fuel level sender problem.
— —
THROTTLE OPEN
ACE: Throttle lever applied while attempting
an engine start (engine cranks but won't run).
Release throttle lever while starting.
— —
DROWN MODE
ACE: Throttle wide open while attempting
an engine start (engine cranks but won't
run). Release throttle while starting.
Fault Codes
MMu ltifunction Analog/Digital Display Only
To read any active fault code, press and hold MODE (M) Button and simultaneously
depress the HI/LOW beam switch repeatedly several times.
If two or more codes are registered, use SET (S) or MODE (M) to scroll.
To exit the fault codes mode, press and hold MODE (M) button.
Contact an authorized Lynx dealer for code signification.
150
______________
To Next Page
Loading...
Need help?
General
