Lyons NanoVNA - Page 19

08/09/2020 NanoVNA User Guide | NanoVNA User Guide
https://cho45.github.io/NanoVNA-manual/#7- トレース 状 態 19/51
function
Trace display
You can display up to four traces, one of which is the active trace.
The trace can display only what you need. DISPLAY TRACE TRACE n Select to switch the display .
There are the following methods to switch the active trace.
Tap the trace marker you want to activate
DISPLAY TRACE TRACE n Select to display. (If it is already displayed, you need to hide it temporarily)
Trace format
Each trace can have its own format. To change the format of the active trace, DISPLAY FORMAT select the format you want to
change.