General Operation
1. Remove the LyxPro HAS-30 Headphones from the package
and unfold before use.
2. Attach removable cable to the cable jack on the headset
as shown.
3. Secure connector to headset by twisting clockwise until it stops.
4. Attach to audio device using the 3.5mm plug.
5. When connecting to some professional equipment, the
¼” adapter may be necessary. Attach the ¼” adapter to the
3.5mm plug. Screw adapter in place to secure.
Specications
Operating Principle: Closed
Connectivity Technology: Wired
Impedance: 32ohm
Sensitivity: 100±3dB
Frequency Response: 15Hz – 26KHz
Max. Power: 1800mW
Rating Power: 300mW
Driver Size: 50mm
Straight Cable Length: Approx. 9.5 ft.
Coiled cable length: Approx. 4 ft. – 10 ft.
Connector: 3.5mm + 1/4" Screw-on Adapter (6.3 mm)
Color: Black
Weight: 10.5 oz
This product is covered by a limited one-year warranty. Please see warranty information on our website at
www.lyxpro.com.
Customer Service:
info@lyxpro.com
866-849-3049
www.lyxpro.com
Distributed by
C&A Marketing, Inc.
2 Bergen Turnpike
Ridgeeld Park, NJ 07660
info@lyxpro.com
MADE IN CHINA
LyxPro is a trademark of C&A IP
Holdings, LLC
©2015 All Rights Reserved
To Previous Page
Loading...