LyxPro SPA8 - Parts, Controls, and Operation; Parts and Controls Identification; Connecting to Bluetooth; Technical Specifications

Parts & Controls
1. Mp3/WMA Player w/Bluetooth
a. Mode Button: Switches between USB/SD Card Reader
b. Pause/Play Button
c. Repeat Button
d. Previous Button
e. Next Button
2. Volume 1: Controls Mic Input Level
3. 1/4” Mic Input Jack
4. Line/Mic Input Switch
5. XLR Mic Input Jack
6. Volume 2: Controls Line Input Level
7. Balanced RCA Input
8. R/L (Red/White) RCA Line Input
9. XLR Line Out to Another Active Speaker
10. Volume Clipping Indicator
11. Treble Knob: Controls tone level of high frequency at range
-12dB to + 12dB
12. Bass Knob: Controls tone level of low frequency at range
-12dB to + 12dB
13. MP3 Volume Knob: Controls volume of MP3 player
14. Power On/Off Switch
15. Power Input
Connecting to Bluetooth
• Switch Power On/Off Switch (#14) to On position.
• Long-press Mode Button (#1a). Display will read “Blue”.
• Turn on Bluetooth function on mobile device you wish to connect.
• When “LYXPRO” appears on your mobile device, select it.
• Short beep will sound. Devices are now connected.
Technical Specifications
Speaker Type: Active
Frequency Response: 40Hz-19KHz
Power Output: 100W
Maximum Sound Pressure Level (SPL ): 106dB
Nominal Sensitivity: 91dB
Impedance: 4ohm
Low Frequency Driver: 8" Woofer 30oz. 1.5"VC 4 ohm
High Frequency Driver: 1" Ti. Diap 8ohm
Enclosure Material: Plastic
Input Connections: XLR/1/4 " Mic Input + 2 RCA Line Input
Dimensions: 17.1” x 11.6” x 0.96"
Weight: 14.7 Pounds
abcde
www.lyxpro.com
Distributed by
C&A Marketing, Inc.
2 Bergen Turnpike
Ridgeeld Park, NJ 07660
info@lyxpro.com
MADE IN CHINA
LyxPro is a trademark of
C&A IP Holdings, LLC
©2015 All Rights Reserved