Need help?Do you have a question about the M-Audio Delta 1010 and is the answer not in the manual?
General| Audio Inputs | 8 x 1/4" TRS |
|---|---|
| Audio Outputs | 8 x 1/4" TRS |
| Sample Rate | Up to 96kHz |
| Bit Depth | 24-bit |
| MIDI I/O | Yes |
| Interface | PCI |
| Phantom Power | No |
| Bus Power | No |
| Digital I/O | S/PDIF |
| Channels of I/O | 10 |
| Sync In/Out | Word Clock |
Explains the function of Bass Management for surround speaker systems and low-frequency sound reproduction.
Activates or deactivates the Bass Management system.
Adjusts the overall output level of all speakers.
Prevents digital clipping by attenuating output volume.
Mutes the output of all speakers.
Increases or decreases subwoofer loudness relative to main channels.
Adds an additional 10dB to the subwoofer output.
Indicates when subwoofer output is too loud or distorting.
Inverts the phase of the signal sent to the subwoofer.
Sets the frequency at which the signal is split between speakers and subwoofer.
Routes low frequencies to both main channels and the subwoofer.
Expands 5.1 surround material for 6.1 or 7.1 systems.
Calculates delay compensation based on speaker distance for audio synchronization.
Mutes channels or reroutes audio signals to front speakers.
To Next Page
