18
Preset Mode
• Off/No LEDs: Fader Buttons will activate the following options:
o ARP On/Off, ARP Edit Enter/Exit
o ARP Latch On/Off
o Chord On/Off, Chord Edit Enter/Exit
o Scales On/Off, Scales Edit Enter/Exit
o 1/4, 1/4T
o 1/8, 1/8T
o 1/16, 1/16T
o 1/32, 1/32T
• MIDI/White LED: Fader Buttons will send predetermined MIDI messages when in a
factory preset, or any user assignable MIDI message when in the user presets.
ARP and ARP LATCH Control
When this button is pressed, it will activate the keyboard’s internal arpeggiator. The
arpeggiator’s rate is based on the current Tempo and Time Division settings – Tempo settings
are editable using the Tempo button. Time Division settings can be accessed by pressing and
holding the Note Repeat button and turning the Encoder or by pressing any of the time
division fader buttons (1/4, 1/8, 1/16, 1/32).
To activate the ARP Latch functionality, press the ARP LATCH button.
Note: You can also sync the Arpeggiator to either the current Tempo’s BPM setting, or an
external MIDI Clock source. The clock source can be edited in Preset Edit Mode and
selecting/pressing the Tempo button. Arpeggiator functionality is available in the 2 keyboard
modes, DAW, PRESET.
Smart Chord Control
When this button is pressed, it will activate the keyboard’s internal Smart Chord functionality.
The Smart Chord functionality can function on notes being played on the keyboard or pads
depending on the selection in the GLOBAL SETTINGS menu. When Smart Chord mode is
active a single key press will play a chord as selected in the current Smart Chord Edit options.
This functionality is available in the 2 keyboard modes, DAW, PRESET.
Smart Scale Control
When this button is pressed, it will activate the keyboard’s internal Smart Scale functionality.
The current scale is based on the current Smart Scale settings (in the Smart Scale Edit menu).
The Smart Scale functionality will only function on notes being played on the keyboard only.
When Smart Scale Mode is active, keys will only play notes in the key of the current key and
scale selection. This functionality is available in the 2 keyboard modes, DAW, PRESET.
To Next Page
Loading...
