M-Audio Hammer 88 Pro - Page 32

32
Second: The pad will send this Program message second when you press it.
Available Values: 0-127
Third: The pad will send this Program message third when you press it.
Available Values: 0-127
Last: The pad will send this Program message last when you press it.
Available Values: 0-127
When set to Program IN/DC (PG IN/DC), these are the available parameters:
Type: The pad will send the next (Increment) or previous (Decrement) value number in the
range of values when you press it.
Min: The lowest Program value in the range of values will correspond with this setting.
Available Values: 0-127
Max: The highest Program value in the range of values will correspond with this setting.
Available Values: 0-127
When set to Zone, these are the available parameters:
Zone 1: When set to On, the pad will activate Zone 1. When set to Off, the pad will deactivate
Zone 1.
Zone 2: When set to On, the pad will activate Zone 2. When set to Off, the pad will deactivate
Zone 2.
Zone 3: When set to On, the pad will activate Zone 3. When set to Off, the pad will deactivate
Zone 3.
Zone 4: When set to On, the pad will activate Zone 4. When set to Off, the pad will deactivate
Zone 4.