M-Audio Hammer 88 Pro - Page 53

53
Transport Control Buttons
To edit the functionality of the <<, >>, Loop, Stop, Play or Record buttons when in DAW Edit
Mode, press the <<, >>, Loop, Stop, Play or Record button. You can scroll through the
available parameter values using the Encoder. Select what parameter you would like to edit by
pressing the Encoder.
Channel: The <<, >>, Loop, Stop, Play or Record buttons will send their messages over this
channel. Select the global channel (Global), a specific channel (Channel 1–16)
Available Values: Global, 1-16
Message:
• Mode: This will specify what message will be sent when the <<, >>, Loop, Stop, Play or
Record button is pressed.
o CC: When set to CC, the <<, >>, Loop, Stop, Play or Record button will send
standard MIDI CC messages to your DAW.
o Program: The <<, >>, Loop, Stop, Play or Record button will send its MIDI messages
using the selected Program number and MSB and LSB values.
o Mackie: When set to Mackie Control, you can use the <<, >>, Loop, Stop, Play or
Record button with a DAW that responds to Mackie Control mode.
o Mackie/HUI: When set to Mackie/HUI, you can use the <<, >>, Loop, Stop, Play or
Record button with a DAW that responds to HUI mode.
• CC: Selects the MIDI CC value that will be sent when <<, >>, Loop, Stop, Play or Record
button is pressed.
• Down: The <<, >>, Loop, Stop, Play or Record button will send this CC value when you
press it.
• Up: The <<, >>, Loop, Stop, Play or Record button will send this CC value when you
release it.
• Program: The <<, >>, Loop, Stop, Play or Record button will send this program number
when you press it.
• MSB: The <<, >>, Loop, Stop, Play or Record button will send this Bank MSB (Most
Significant Byte) number when you press it.
• LSB: The <<, >>, Loop, Stop, Play or Record button will send this Bank LSB (Least
Significant Byte) number when you press it.