10
MB-3 Electromagnetic Organ
The MB-3 is a Classic Tonewheel Organ with Leslie rotary speaker simulator.
Percussion On/Off: switches percussion section On/Off.
Short/Long
: selects duration of percussion.
Loud/Soft
: loud or soft percussion.
3rd/2nd
: 3rd or 2nd harmonic for percussion.
Drawbars
Laid out as per a classic Tonewheel Organ:
16‘ Fundamental
5 1/3‘ 3rd Harmonic 1 Octave and a Fifth Higher
8‘ 2nd Harmonic 1 Octave Higher
4‘ 4th Harmonic 2 Octaves Higher
2 2/3‘ 6th Harmonic 2 Octaves and a Fifth Higher
2‘ 8th Harmonic 3 Octaves Higher
1 3/5‘ 10th Harmonic 3 Octaves and a major 3rd Higher
1 1/3‘ 12th Harmonic 3 Octaves and a Fifth Higher
1‘ 16th Harmonic 4 Octaves Higher
Click: sets the level of mechanical key on and off clicking.
Scanner Vibrato
Classic Tonewheel Organs had an additional chorus/vibrato section. The ‘V’ settings are vibrato settings while the ‘C’ settings are choruses.
V1 & C1
: produces the lightest modulation.
V2 & C2
: produces a deeper modulated sound.
V3 & C3
: are the deepest and grittiest settings.
Drive: allows you to add tube overdrive before the rotary speaker.
Rotary On/Off: turns rotary speaker on/off.
Slow/ Fast: sets rotary speed.
NB: rotary speed can also controlled by the pitch wheel. Moving the pitch wheel up sets the rotary speed to fast while moving it down sets
it to slow.
To Next Page
Loading...
Need help?
General
