Need help?Do you have a question about the M-Audio Profire 610 and is the answer not in the manual?
General| Signal-to-Noise Ratio (SNR) | 107 dB |
|---|---|
| Total Harmonic Distortion (THD) | 0.0025 % |
| Sample rate | 192 kHz |
| Audio quality | 24 bit |
| Microphone input impedance | 3700 Ω |
| Microphone Total Harmonic Distortion (THD) | 0.0022 % |
| Line-in Total Harmonic Distortion (THD) | 0.002 % |
| Line-out Total Harmonic Distortion (THD) | 0.0016 % |
| XLR in | Yes |
| Interface | FireWire |
| Headphone outputs | 1 |
| Product color | Black |
Details front panel inputs, gain, clip indicators, headphone controls, phantom power, and power status.
Describes rear panel connectors for power, FireWire, MIDI, S/PDIF, line inputs, and outputs.
Guides on connecting microphones, instruments, line-level devices, and digital S/PDIF sources to the interface.
Explains headphone output functionality and connecting rear-panel line outputs to monitors or mixers.
Introduces the Control Panel, its purpose, and the function of mixer tabs for creating monitor mixes.
Details controls like Level Meter, Pan, Mute, Solo, Stereo Link, Level Fader, and Channel Name for detailed audio routing and mixing.
Configures digital sync source, sample rate, and buffer size for hosted and standalone modes.
Covers advanced settings like high sample rate mixers, master volume config, About, File, Edit, View, Peak Hold, and Help menus.
Guides on setting optimal gain for Mic/Inst inputs, Line inputs, and S/PDIF inputs for recording.
Details setting ProFire 610 as audio device, routing outputs, and setting session sample rate/bit depth.
Explains overdub concepts and using monitor mixers for cue mixes and low-latency monitoring.
Covers scenarios for setting ProFire 610 as master, slave, or in a digital loop for synchronization.
To Next Page