RE 93221-01-B/07.2013, A22VG Series 40, Bosch Rexroth AG
3/56 Contents
Contents
1 About this documentation 5
1.1 Validity of the documentation 5
1.2 Required and supplementary documentation 5
1.3 Display of information 6
1.3.1 Safety instructions 6
1.3.2 Symbols 6
1.3.3 Designations 7
1.3.4 Abbreviations 7
2 Safety instructions 8
2.1 About this chapter 8
2.2 Intended use 8
2.3 Improper use 8
2.4 Personnel qualifications 9
2.5 General safety instructions 9
2.6 Product-specific safety instructions 10
2.7 Personal protection equipment 12
3 General instructions on damage to equipment and the product 13
4 Scope of supply 16
5 Product description 17
5.1 Performance description 17
5.2 Product description 17
5.2.1 Assembly of the axial piston unit 17
5.2.2 Functional description 18
5.3 Product identification 19
6 Transport and storage 20
6.1 Transporting the axial piston unit 20
6.1.1 Transporting by hand 20
6.1.2 Transporting with lifting device 20
6.2 Storing the axial piston unit 22
7 Installation 24
7.1 Unpacking 24
7.2 Installation conditions 24
7.3 Installation position 26
7.3.1 Below-reservoir installation (standard) 26
7.3.2 Above-reservoir installation 27
7.4 Installing the axial piston unit 28
7.4.1 Preparation 28
7.4.2 Dimensions 29
7.4.3 General instructions 29
7.4.4 Installation with coupling 30
7.4.5 Installation on a gearbox 30
7.4.6 Installation with cardan shaft 31
7.4.7 Completing installation 31
7.4.8 Hydraulically connecting the axial piston unit 33
7.4.9 Electrically connecting the axial piston unit 38
7.5 Performing flushing cycle 38
To Next Page
Loading...