General instructions on damage to equipment and the product 15/56
RE 93221-01-B/07.2013, A22VG Series 40, Bosch Rexroth AG
NOTE
Escaping or spilling hydraulic fluid!
Environmental pollution and contamination of the ground water!
▶ Always place a drip tray under the axial piston unit when filling and draining the
hydraulic fluid.
▶ Use an oil binding agent if hydraulic fluid is spilled.
▶ Observe the information in the safety data sheet for the hydraulic fluid and the
specifications provided by the system manufacturer.
The warranty applies only to the delivered configuration.
The entitlement to warranty cover will be rendered void if the product is incorrectly
installed, commissioned or operated, or if it is used or handled improperly.
To Next Page
Loading...