CONTINUED: STEPS AND PROCEDURES FOR PROPER CASE FUNCTION
INSPECTING YOUR GUARDIAN CASE
Make sure the O-ring is present and properly seated.
Roll finger over the O-ring channel to ensure it is properly installed.
Inspect all 4 Latch-Locking Mechanisms making sure the Tab, Hinge and Hook
are moving free of obstruction and latching into the Latch-Locking Groove on
Case Front. Check for cracks or irregularities.
Make sure the flexible panels are fully attached to hard plastic.
1
2
3
4
1
2
3
4
CONTINUED ON NEXT PAGE SECTION I
To Next Page
Loading...